Powder Funnel Cap with Filter

This screws on to the top of 1lb Hodgdon type powders (Hodgdon, Winchester, Accurate, Shooters World, etc) and allows you to pour powder back into the bottle with less of a mess.  Perfect for returning powder from your powder throw after reloading or refilling your 1lb bottle from an 8lb bottle.

This version contains a screen to filter out items.  Ever drop something into your powder and it sinks strait to the bottom?  This will help either prevent that or retrieve it afterwards.

Print Settings:

• I used supports only on the underside of the lid (the horizontal overhang).
• I used 0.16 line height for the one in the picture
• This type of model is particularly prone to having ugly seams.  Unless you use scarf seams, you're either going to have a seam line or “zits”.  The print in the picture used random seams with scarfs in Orca slicer, which works pretty well.
• Some people struggle with printing threads.  If you've never printed threads before you might want to isolate the cap and test print.  Generally they are not difficult but I use all walls when printing threads.  With 0..20 that's 7 walls on the cap section.  I split the settings so I'm not using that many walls for other areas.

Enjoy!