Monolith calibration cube
Calibration cube inspired from monolith gantry
27
123
2
342
updated
February 25, 2025
Description
PDFPrintable calibration cube designed and taken inspiration from the Monolith gantry project
If the calibrations below come out perfect, you are ready to start your monolith gantry!
Features:
- Bottom hole fit F695/F698 bearing and the cap should close
- Top hole fit (F)695/(F)698 bearing
- Recessed logo is 2.5mm deep, allows checking for grubscrew length
- Top and bottom of flat side used to check ringing and vfa
- Bridging test in the center
- 20-30 deg overhangs on the logo
- Hidden easter egg
Recommended print settings:
- Per monolith recommendation
Recommended materials:
- Per monolith recommendation
Changelog:
| Official release | Changes |
|---|---|
v2 26th Feb 2025 | First official release |
Model origin
The author remixed this model.
Differences of the remix compared to the original
Made the cube with logo, inspirations taken from the printed gantry, double shear mount