The Ulanzi TC001 in combination with Awtrix3 firmware serves as a beautiful display for Home Automation projects. The display is very affordable, but it is meant to stand on a desk - there is no way to fix it to a wall. That's why I designed this holder. It looks very nice (printed in white PETG) and is very stable. You can easily operate the push buttons on top.
In my case I was able to use an existing cable and mounting holes where once an old alarm terminal was mounted. I modded the TC001 to run without battery on 12V, but there is also enough room to use an angled USB-C connector.
Use a piece of double sided tape on the slanted top side to fix it properly.
The author marked this model as their own original creation.