Headphone stand

I needed something for my headphones and wanted something different. I then came up with this to keep my headphones from laying around on the table.

You can print the stand alone for the smaller style headphones, like my Sennheiser HD25's. You can add the snap on base to raise it up a bit for larger models like my Sennheiser HD650's. I've added another, higher base which adds another 17.5mm to the total height.

I ended up printing the main stand using tree supports from the bed as printing without them led to disaster because the overhangs at the top were too much for printing without supports. I used some Silk PLA, but you can use whatever you want. The grey/black version is printed using PETG. You can customize the other settings according to your needs. If you need strength increase number of wall loops and infill. The examples are printed with 0.2mm layers, 15% grid infill and 2 wall loops on a Bambu Lab P1s through Orca Slicer.