Milescraft 1318 Drillmate Chuck Key Holder

A chuck key holder with a magnet for the Milescraft 1318 DrillMate. The magnet holds the key securely, even when upside down.

What you will need:

1. A 5x5mm cylindrical magnet (5mm height and 5mm diameter)
2. CA glue (super glue)

Printing:

1. 0.4mm nozzle
2. 0.2mm layers
3. 3 perimeters
4. no supports
5. PETG recommended

Installation:

1. Insert the magnet from the bottom. The hole is tight, so you will need to apply some force.
2. Using CA glue (super glue), attach the key holder to the DrillMate as shown in the pictures.

Others:

1. stl and step files available

A remixed chuck key holder for the Milescraft 1318 DrillMate