Inkplate 5 Rev. 2 Case and Stand

2-in-1 case and stand for Inkplate 5 Rev. 2
2
10
0
78
updated February 23, 2025

Description

PDF

2-in-1 case and stand for Inkplate 5 Rev. 2.

I recommend printing the “foot_base” with 100% infill to add weight. Weight is the same reason I chose to use long screws with heat inserts in the base.

Parts needed:

  • x2 M3x12 Screws, preferably with low head (2.4mm)
  • x2 M3x14 Screws, preferably with low head (2.4mm)
  • x4 M4x35 Screws with low head (3.1mm)
  • x4 M4 Heat inserts

Don't use M3x14 at the top, you can damage the screen!

Tags



Model origin

The author marked this model as their own original creation.

License