Hotplate holder 5 slot and 220-320mm

Hello !

If you like my work, please rate it.

I don't think it needs any special explanation.
The size is adjustable between 220 and 320mm.
The screw that fixes the adjustment doesn't need to be tightened too much, because the thread will break. It was intentionally made to swing back and forth to make it easier to remove and replace the hotplates. Therefore, the axle screws don't need to be tightened too tightly.
By the way, you need 3mm diameter screws.
For those who find the models swinging too much during printing, I also included a version with a support.

Bb.