Small Cutter

• Design Overview:
  This is a compact slider cutter, measuring less than 10 cm. It is highly practical for opening cardboard boxes and filament protective films with ease.

• Assembly Instructions:
  No glue is required for assembly. Simply follow these steps:

1.Print all the required parts.

2.Purchase a compatible knife blade (link provided below)

3. Put the decorative ring into the hole and the knife blade over the slider:

4. Close the slider assembling the top part:

5. Close the cover assembling the top part:

6. Slide the slider inse the cover, do not put the clip yet!:

7. Put the clip in the square hole, and that's all!:

• 3D Printing:

0.2mm layer. 

No supports required.

• Knife blade: 

https://a.co/d/g4QhJYi