Grease gun mounts.

A simple, support free mount to keep your grease gun stored away.

I have included all three iterations of this design.

1 has a 65mm opening and no support for the hose.
2 has a 62mm opening and has a small lip to support the hose.
3 has a 62mm opening and has a 20mm opening to the side to accept a LockNLube coupler. I also placed the mounting hole lower, to allow me to tip it to the side slightly for easier removal.

All three have an 8mm mounting hole with a 15mm inset one #1 and 2. # 3 has a 20mm inset.

This was designed around a Blue-Point YA728A grease gun, but should accept any standard size grease gun.

If you have any suggestions, please let me know.