90mm fam thread adapter

I was annoyed but the design of the sv08 hepa+ filter, to take it off you have to take the whole thing apart to remove the 4 screws that bind the filter to the printer.

It takes 10 screws and the removal of the carbon pellets and the hepa filter.

with these adapter plates all you need to do is twist it off and you are done (preferably you'd still want to take out the carbon pellets, so +2 screws you would need to remove).

BOM:
4 M4x4x6 threaded inserts for the female plate
and 4 M4X6 BHSC screws for the male plate

You can reuse the screws that came with the enclosure to screw on the filter, maybe use 1 or 2 washers if they are too long.

The 3mf file has negative modifiers that make it easy to add the threaded inserts.

fused threaded parts and fan plate together