Organizer for Commands & Colors Samurai Battles

Organizer for Commands & Colors Tricorne: Jacobite Rising.

The main design idea was to make bringing the wooden blocks to the table easy. For this, they are stored in 4 for a unit, with enough space between them to grab all 4 in one go easily.

It has lid lift if you can live with that. You may use sleeves with the cards.

Any file that ends in x2 is to be printed twice. Filler files are to be printed only if you do not want to have your blocks moving around. You will need more fillers if you do not store your spares with the other blocks.

To have the effect you see on the lids, for each one select in your slicer that object and be sure to put the Bottom and Top Shell Layers to 0, and select a sparse infill density from 10 to 20% and a pattern you like (Honeycomb or Cubic - need to rotate the stl 15º - or Grid for the best results).

If you do not own a 3D Printer you may still get this physically printed in my store: 3DPrintforGames.etsy.com