Stealth Wall Mounting System - Easy to take off and on

This is a compact stealth mounting system that you can 3D print yourself. I originally saw a similar concept used in woodworking, but I couldn't find anything like it in stores near me—so I made my own.

What You’ll Need:

• 25mm Forstner drill bit
• T20 countersunk BLAX 4.5 mm screws (I used Spax screws, available in Europe)
• Wall screws (as shown in the image, supports screws up to 4.5 mm)

Instructions:

1. Drill the hole – Use the Forstner drill bit to create a hole in your wood.
2. Attach the stealth mount – Secure it with a compatible screw.
3. Mark wall screw positions – Measure and mark where your wall screws will go.
4. Adjust screw depth – Ensure the screw heads hit the back of the mount, as this prevents the mount from sliding off easily.

3D Printing Details:

• Material: PETG
• Infill: 100%
• Supports: Required (remove with a screwdriver or similar tool)