This is a Clip designed to fit a 10x11mm Cable chain (Example: https://www.aliexpress.com/i/33000014666.html) and be mounted on the Bottom or Top of each chainlink.
I had issues with electrical interference on my BLTouch so I decided the easiest solution would be to move the cable away from the main cable chain. To do this I created this clip which lets me mount the cable right on top of my preexisting cable chain without major issues.
The holder is designed to be able to fit the little Molex Picoblade connector of the BLTouch.
This model was designed with a 0.6mm nozzle and 0.68mm linewidth in mind so you may have to change the dimensions to fit your setup. The .step file is therefore included in the downloads.
Printer Brand:
Anycubic
Printer:
Chiron Direct Drive modded
Supports:
No
Nozzle:
0.6mm
Resolution:
0.2mm
Infill:
doesn't matter
Filament:
Fillamentum PLA Vertigo Grey
The author marked this model as their own original creation.