Slime Table Lamp Dual-Color No AMS by MODERN MACHINE

COMMERCIAL LICENSE // UNLOCK ALL FILES
======================
Shade should be printed in vase mode with 0 top/bottom layers.
This is for e26/e27 lightbulbs.
You require a hanging light cord such as this: https://a.co/d/dKbt8kF
You must use an LED lightbulb.
6-12% infill
5 top layers
2-3 outer walls.
Tree supports recommended.
Don't scale unless you have an adapter.
======================
MODERN MACHINE© STL files are strictly for personal use. Unauthorized resale of these digital files is illegal and subject to legal action. Respecting this copyright policy not only protects intellectual property but also supports the creators and the integrity of the 3D printing community.