Prusa lubricant LM8UU adaptor with screw cap

Object description:

Tool for lubricating LM8UU bearings.

Since many people ask for a screw cap in combination with the bearing pacifier from David Honza, here it is.

Handling Instruction from David Honza (nothing to add from my side):

Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn it counterclockwise until you feel a slight resistance. Then press the tube and watch the tip of the tool for grease leak. Once the grease starts leaking, the bearing is lubricated sufficiently. 

Print settings:

Material: PLA.

Resolution: 0,1mm

Infill: 25%

Perimeters: 2

Brim: no

Support: no