Remix of VFA Test Prusa Core One for Akermake M5

I edited the gcode to turn the print cooling fan off by setting speeds commands to 0. I also set the print temps all to 250C for the Overture Easy Nylon filiament mfr recommendations. As you can see if you zoom into the print, it starts failing about 60 percent of the range. I have the Ankermake All Metal Hot End (now unavaliable as they've pulled it from production) with a steel .4 nozzle. Should work on a stock hot end as stock is rated to 260C. Stock brass nozzle will wear with this PA-CF filiament due to the carbon so recommend using a high temperature/hardened nozzle. Posted this for those working with more exotic filaments. I'm tuning my M5 to see if I can print this Nylon variant.

I edited the gcode to turn the print cooling fan off by setting speeds commands to 0. I also set the print temps all to 250C for the Overture Easy Nylon filiament mfr recommendations.