This is a clamp that works similarly to the Hakko Omnivice.
Assembly instruction:
- Print all four parts.
When printing the base, add a pause before the hole in the center gets covered. Insert a long threaded spacer (M5 x 20 mm) with internal threads and a HEX key size of 8mm. - Fill the base with something heavy (plaster, screws, sand, epoxy, …).
- Glue the lid on the base.
- Take the washer part and on one side glue some non slip rubber on (e.g. ESD matt, …).
- Take the washer and clamp part and put a M5x40mm screw through both parts. Secure the clamp part tightly with a M5 hex nut. Put the nut into the hex shaped recess in the clamp part. The non slip surface of the washer has to point outwards! Thread a thin M5 nut on the screw until there is a gap of 2-3mm between the washer and the clamp part. Secure the nut with a drop of threadlocker.
- Screw the clamping assembly into the base.
Tags
The author hasn't provided the model origin yet.