CoPrint KCM mount for Rat Rig
I needed someway to mount the KCM on my Rat Rig. Used the design by Jeffery Stranham as a start.
3
13
0
109
updated February 20, 2025
Description
PDFThis is one part of the CoPrint system that I made for the Rat Rig install.
The mount for the Chroma Head
https://www.printables.com/model/1191837-coprint-mount-for-rat-rig-v-core-3
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
I used the hole pattern from the original mount, after a number of changes i came up with the current design. It mounts on the 3030 extrusion on the top rear of the Rat Rig using bolts and t-nuts. There are numbers on the top to identify the cables and labels on the bottom.
I used 2mm x 20mm screws to attach the mount to the back of the KCM.
