On Thingivers, it was one of the most popular and most printed charging docks for the Apple Watch!!!!
Now I have decided to offer the new update only here exclusively on PrusaPrinters.
After a long time and many requests from users, I am happy to present you the New Update that is now available for the Apple Watch Series 6, 7 and 8 with new Charger (For now only the Curved Design for small and big version, other will follow soon!)
11.02.2022 > Added a Apple Watch 6 to 8 45mm Version for protective Cover Users. Should fit for Cover that are around 1.4mm thick
24.10.2022 > Works for New Apple Watch 8 as well
One thing was very important for me, because the Apple Watch Charging Wire is sometimes to long and i hate that mess with all that Wire on my Desk. So i decided to add an Wire Storage into the Charging Dock so you can store the excessive Wire there.
The old version was usable for the Apple Watch Series 1 to 4 and is available in three designs each for the small and big version.
Simple print!
No support needed!
10% Gyroid infill is sufficient!
PLA and PETG gives a very good results on 0.15mm of course with original Prusament! ;-)
Happy Printing!!!
The author marked this model as their own original creation.