Magnetic Coupler Bulkhead Edition
Magnetic coupler for going into drywall with 2.5Inch pipe behind.
1
0
0
32
updated February 23, 2025
Description
PDFI took @furfoxsake_91956 design and just tweaked it a bit to pass through drywall and mate up with a 2.5" pipe on the other side. Attached them with glue, added magnets. Check the magnet hole size before printing to match what you have on hand.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
changed the pipe side of the model to flush against the wall and mate up with a pipe on the other side.
