Wall Outlet Safety Cover Plates (Plug Cover)

Mix and match sleeves for two-prong, three-prong and normal applications! Great for things you leave plugged in all the time, like lamps, chargers, or even the reclining chair!

These outlet covers are designed to make it hard if not impossible to touch the metal plug contacts which are plugged in or while being plugged in. 

Avoid shock hazards when plugs are hanging slightly away from the surface of the plug face, exposing the energized metal prongs. 

Helping avoid shock hazards if the user is touching the contacts unknowingly while plugging it in. They also add a level of safety to the plug while it is plugged in, from people or pets which are passing by and may bump into the plug.

Print the Standard or Square Safety Cover and the corresponding sleeves that you need. Then press the sleeves into the covers in the orientation that you need! Only want to add protection to half the outlet? Just print one sleeve and one blank. Want to go back to the normal look? Print the square blank or two blank sleeves! Customizable and easy to install.

Print at 30%+ infill with 2-3 walls. Use tree supports for the square half blank and sleeves.

As always, if you print it and enjoy it please come back to show your make, get some prusameters and leave a rating!