Twinky FPV plane FC mount with 35mm fan

I didn't want to use double-sided take directly on my flight controller so I designed this mount for the FC and a cooling fan. This way I don't ruin the bottom of my FC when I try to remove it, and I have a secure mounting point for a 35mm cooling fan.

I mounted my fan blowing away from the FC as there will be air coming in from the nose anyway which will probably just make the fan pointless. This way, the fan blows with the existing airflow which should provide good cooling.

There are two versions: a 20x20 mounting version for most flight controllers and an 18x22 version for the Speedybeef405 Wing Mini.

For mounting into the fuselage, use a little bit of double-sided mounting tape underneath the fan bracket and just use two M2x8 screws in the front.

For mounting the FC, use M2 screws, and use M3 screws for the fan.

This mount should work with any other planes with 20mm mounting points.

Print in PLA or PETG.