Elegoo Neptune 3 Pro Screen cover

I've been using my Neptune 3 Pro overnight for the last few days and the light from the screen has became an annoyance. So I designed this easy to print , hinged cover for the screen. 

Print Settings

Print with flat side down

No supports needed

0.2 mm layer height

At least 3 top and bottom layers

I used 50% infill

Assembly

I designed it in such a way that the base and the cover can be joined together with filament pieces itself. Just cut out small pieces, about 30mm , and use them as the hinges. The base can be then attached to the screen. It is not a very tight fit, you may use some tape if needed. 

If you like the model, please try it out and give your feedbacks.

.step files are uploaded in case someone wants to remix.

Have a nice day.