Nexum Galaxy w/Asteroids Expansion Box Insert

There was a lot of wasted space with both boxes and the provided inserts were awful at keeping the many tokens in-place so I designed my own. Pretty happy with how it turned out but I haven't played the game yet to know how well it does/doesn't help with setup and teardown.

I printed all parts except the Tray Guards with the following settings:

• Layer Height: 0.28 (but any height should be fine)
• Walls: 2 (arachne but classic should be fine)
• Infill: 8% gyroid to reduce weight

For the Tray Guards, you can print with the settings above but I wanted to make it so you can see through them and have it be obvious you're supposed to remove to get to the components underneath. So I used these settings:

• Layer Height: 0.28 (any height should be fine)
• Walls: 4
• Infill: 8% honeycomb (should be able to use any infill but be careful to keep holes small)
• Top Layers: 0 (to show infill)
• Bottom Layers: 0 (ditto)

I think that's it. Let me know if you have questions and please share your makes!