Prusa mk4s Filament buffer enclosure magnetic mount

This remix or modification allows for simple  insertion of magnets without the need of any glue or screws. Press the magnets in place and install the buffer plates, once the screws are installed and they make contact with the pressed in nuts provided my prusa, the magnets will not move out of place and the buffer can be placed inside of the enclosure. Thats it  the buffer will be pressed against the printer and the magnet will stop the buffer from moving and doing its job without adding any added complications.

I added the link of the magnets i purchased off amazon. If you do purchase these magnets please install with full caution, they have a 30LB pulling force  meaning they can really hurt you if you are not careful. 

 https://www.amazon.com/dp/B071ZKQ2X5?ref=cm_sw_r_cso_sms_apin_dp_RN921JXG6F8HJ5DBTBKM&ref_=cm_sw_r_cso_sms_apin_dp_RN921JXG6F8HJ5DBTBKM&social_share=cm_sw_r_cso_sms_apin_dp_RN921JXG6F8HJ5DBTBKM&starsLeft=1&th=1

The bracket used to press against the printer is the same bracket. What is different is the base that the buffer  plate is mounted to.