Does what it says on the tin--holds a Playstation 5 controller on a wall control board.
Controller sits vertically against the board. Two little ribs on the front slot between the raised portions of the controller for the joysticks to prevent side-to-side movement. In some rough testing, the controller will self-center and fall back into place when tilted to around 30 degrees, and has to be tilted to around 45 degrees before it will start sliding off of the hook. It easily slides right in and lifts straight out.
Requires WC3-PARTS from the “WC3 - Base + Parts” printable for assembly: https://www.printables.com/model/1196407-wc3-base-parts
The author marked this model as their own original creation.