Three Heart Gears sans logo

I love emmett's heart gears. I love emmett's gear bearing. I do not love advertising. It is not permitted inside my house. No television I own plays commercials, and no computer I use displays ads of any kind.
plastering your initials onto a model is advertising.

Fortunately it was a lot easier to remove the monogram from this model than it was from the gear bearing.

SCAD source and STL files included, same as original model.

I would also note: I had to elongate the pins for the smaller gears. For some reason they wouldn't mesh with the standard pins and center(printed from original STL files). Assembled fine, but when trying to turn the small gears would pop off. Closer examination revealed they sat about 3mm out from the central body. So I made pins 3mm longer in between the snap ridges. Included also in case anyone else had this issue.

And for clarification:
HeartGears0: 18 and 9 tooth gears
HeartGears1: 9 and 6 tooth gears
HeartGears2: 18 and 15 tooth gears
Same as the type specified in the scad file.

Print instructions

Category: Interactive Art