Novacula Mortalis - Hueforge

Novacula Mortalis - Hueforge

You can safely ignore any alerts in your slicer about needing supports for all of my Hueforge designs, do not enable supports as they will mess up the print.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Dark Grey Transmission Distance: 1
PLA PolyLite Steel Grey Transmission Distance: 1
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite Pro White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Dark Grey
At layer #12 (1.04mm) swap to Steel Grey
At layer #17 (1.44mm) swap to Grey
At layer #21 (1.76mm) swap to White for the rest.

Enjoy!