Print in place 'Clickon Bottle Carrier' with carabiner hook

Update 18.02.2025: Added a version with a closed ring.

A print in place  'Clickon Bottle Carrier' with carabiner hook for transporting PET or glass Bottles up to 1 liter.

To fix the carrier with the integrated carabiner hook to a backpack ore something else, press the bar sideways to open it.

Use one carrier per bottle to carry as many units as you want.

This is an easy to print model with a movable joint. 

With a MMU3 easy printable in two colors (see cover picture)

Printing instructions:

• 0.4 nozzle
• 0.2mm Speed
• 15% infill
• no supports needed
• using PETG will make it more durable, PLA should work also
• after printing, first gently move the swivel until it comes loose. Then turn it a few times until it moves easily

If you need a more rugged carrier, set infill to 25% and the fill pattern to gyroid.

Using 3 perimeters makes it even stronger but its more difficult to clickon.