Six-Sided Shadow Lamp

A lamp with six sides that throws two different shadow/light patterns on the ground. It uses a lamp with a solar panel to charge during the day.

It is printed in one piece and doesn't need any supports. To use outside it is recommended to print in a UV-resistant material like ASA.

Printable feet are also included. They need to be glued to the underside and can be printed in TPU.

The shadow lamp is designed for a solar lamp with a diameter of 9.3cm. Different adapters are included for the most common lamps you can buy online.

Supported lamp diameters:

• 9.3cm (default)

• 7cm (7cm_adapter)

• 7.3cm (7.3cm_adapter)

The used lamp: 
https://de.aliexpress.com/item/1005006009148826.html?spm=a2g0o.productlist.main.9.66f54166P5Huop&algo_pvid=66d6a490-f74a-4cf6-91f4-3c70e221425f&algo_exp_id=66d6a490-f74a-4cf6-91f4-3c70e221425f-4&pdp_ext_f=%7B"order"%3A"13"%2C"eval"%3A"1"%7D&pdp_npi=4%40dis%21CHF%216.21%216.03%21%21%216.77%216.57%21%402103846917397928113052221ee55e%2112000035301276934%21sea%21CH%212934704735%21X&curPageLogUid=Zwy4mON6z7ii&utparam-url=scene%3Asearch%7Cquery_from%3A 

Other supported lamps:

• https://www.amazon.de/Aoreun-Solarleuchten-Leuchtmitteln-Ersatzteile-Solarlaterne/dp/B0C7K1CCLJ/ref=sxin_15_pa_sp_search_thematic_sspa?__mk_de_DE=ÅMÅŽÕÑ&content-id=amzn1.sym.bd7022a0-e4dd-4343-b466-cbf492e38a12%3Aamzn1.sym.bd7022a0-e4dd-4343-b466-cbf492e38a12&crid=NR9YR6A8KV05&cv_ct_cx=solar+panel+lantern&keywords=solar+panel+lantern&pd_rd_i=B0C7K1CCLJ&pd_rd_r=ad7513be-ffec-45b1-84cc-03327ca848dd&pd_rd_w=suGt1&pd_rd_wg=e0LZJ&pf_rd_p=bd7022a0-e4dd-4343-b466-cbf492e38a12&pf_rd_r=7VVRKQ01QPYEW5ST98W7&qid=1739794577&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sprefix=solar+panel+lantern%2Caps%2C76&sr=1-5-0bff13d2-7188-4a82-bb3a-ccd1e70f0167-spons&xpid=aY46xpJfAhQ3j&sp_csd=d2lkZ2V0TmFtZT1zcF9zZWFyY2hfdGhlbWF0aWM&psc=1 
• https://www.amazon.de/dp/B0D3TTN3K5/ref=sspa_dk_detail_0?pf_rd_p=6ffc9ff7-fa31-49da-8594-196e74bcf61e&pf_rd_r=3RK6J0632BFM0BYF672K&pd_rd_wg=N3eBu&pd_rd_w=MEWXN&content-id=amzn1.sym.6ffc9ff7-fa31-49da-8594-196e74bcf61e&pd_rd_r=531e01c9-027e-431e-93de-301fbb5316b2&s=lighting&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw&th=1 

Print Settings:

• Layer Height: 0.2 (or wathever you want, it doesn't matter, the circles may not be as round with a bigger layer height)

• Material: PLA or PETG (ASA or alternatives for outside)

• Supports: No

• Brim: Yes (inside and outside)

• Print the .step file for better quality

Some adhesive may be required depending on you printer and your settings (especially for ASA)