Zandvoort Circuit F1 - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 122x170mm in size
 

Filaments Used:
PLA+ Sunlu Black 
PLA+ Sunlu Grey 
PLA+ Sunlu White 
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Grey
At layer #12 (1.04mm) swap to White for the rest.

Here you can find the other circuits I made: https://www.printables.com/@keko_2402703/collections/2118034