Quiet MK4S Fan Cover - for X-axis resonance - Aesthetic Remix

I remixed this design for better aesthetics, including properly covering the exposed wires that were visible. Please see the original design for the reasoning and results video of this fan cover modification.

If you print with these settings it is the same weight as the stock fan cover 
0.4mm nozzle at 0.2mm layers
3 top layers with min shell thickness of 0.6mm
3 bottom layers
25% Cubic infill

Printing with supports guarantees that the screw hole openings' bridging is perfect without having to worry about fan settings.

03/12/2025 Update:
After one user reported they had to add a piece of tape to increase the pressure on the center of the fan, I updated the model to make the bump-out be 0.6mm in height rather than 0.4mm. When I initially made the remix the original design said it used a 0.6mm height increase despite the STL only being 0.4mm. It seems that design has also been updated to 0.6mm in the STL since then.

Redrew the inner portion to properly cover the supports of the fan, including the wider area with wires