Airbrush Paint Stand

I took some inspiration from others while designing this. Thanks for everyone else posting their models.

This is a four tier paint stand for holding 30 1oz bottles of airbrush paint. I couldn't find one that fit my needs, designed this one, solved all my issues and decided to publish. Bottles have about a 2mm clearance, enough to pull them out and return them without too much space.

Please print the Clearance Test file first, this will let you know if you need to make any adjustments. The “stairs” in the clearance test should be tight, I needed to gently tap them in with a hammer. The “C” shape should be loose. This is meant for alignment. Finding a middle ground where both sets fit together easily is ideal. 

After printing all parts,  I tapped them into a side (triangle) panel then dabbed a little CA glue on the alignment tabs and side panel tabs. Do the same thing with the other side. After the glue is dry, fit on the back panels and dab a little CA glue on the tabs. Whatever glue you usually use is likely fine, I just like Starbond CA glue.

I've spent some time on this. Though I don't expect any compensation, I'd appreciate the like and add to your collections! Post your make too, myself and many others want to see!