140mm Fan Duct Connector

An adaptor/connector for 140mm fans to 4 inch - 6inch corrugated flexible ducting

The base design uses M4 hardware for connection to a 140mm fan. The magnetic version uses 10mm x 3mm disc magnets in the base. Versions for 8mm and ½ inch magnets have also been made.

Print settings

Can be printed in any material and without supports. Although, if you are having trouble getting the magnets into the press fit holes some local support can be used in the holes. Printed at 0.3mm and 0.4mm layer height with 0.6mm nozzle to reduce material usage and print time.

Only 71g of material.