Z-Wheel for the Milo Millenium Mill.

 A Z-Axis wheel for the Milo Millenium Mill. Uses the “Handwheel Handle x2.stl”.

Bom:

2 M4 screws - threat needs to be at least 12 mm long.

1 M8 washer or appropriate shim with 8 mm hole in the center

1 M5 Heatset nut for 6.5 mm holes

Screw safety glue

1 Handwheel Handle x2.stl from the Milo library

1 M5 * 30 Imbuss screw for the Handle

In order to apply the Z-Axis Belt as well as the belt wheels need to be removed. Both wormscrews from the larger wheel need to be removed. The washer or shim needs to be placed on the Z-Axis screw to ensure the z-axis belt wheel is not colliding with the printed part. Reassemble both wheels, but turn the larger wheel on the z-axis screw around. Place the z-wheel onto the larger Z-axis belt wheel such that the two holes align with the 2 screw holes in the z-axis belt wheel. Coat the 2 M4 screws with screw safety glue and screw them throught the z-wheel into the Z-axis belt wheel.