Ball bearing filament spool mount kit for M8 rod

Complete part set (with lock nuts) for filament spool mounting on M8 threaded rod - the spool stand is not a set part! 
This kit is designed for use with the 608 bearings (common used as "Inline Skates Bearing").
No supports or gluing required.

Preferred printing settings

Material: any (tested with PET-G)
Infill: 30% rectilinear
Perimeters: 3 (1.2mm)
Layer height: 0.1mm
Solid layers: 12 (1.2mm)
Supports: not required
Nozzle diameter 0.4mm

Additional components required:

• M8 threaded rod - length as required
• 608 bearings - two pieces

Additional tools:

• M8 tap - may be needed for final finishing of printed threads

Attention!

• Avoid gluing the bearings - this can lead to their complete blocking and irreversible damage! The bearings should be (carefully) pressed in!