Spool holder

I changed the length of the spoolbus to the right length. sorry for the people that downloaded it with the wrong dimensions.
Also just a tip, i printed only the spool holder corner because it's easier to print and I think it's even faster.

I had the shaft and bearings left of the MMU1 so i decided to use that to make my spool holders. I initially mounted the holders on the top of my enclosure but i eventually mounted them on the outside and on a 90 degree angle of my enclosure. it works really well and you can change it to your size if you want . I designed it for the 1KG fillament rolls.
the dimensions of the tube is: D=24,5; d=4.15 L=105
I used it on a bearing with the following dimensions:

• thickness 7mm
• D 21,9mm
  the shaft has the following dimensions:
• D 7,9mm
• L 120
  i would recommand to adjust all dimensions to whatever tube you're using.
  hopefully it'll be useful for someone:)