Ultrahuman Ring AIR Case

I need to bring the Ultrahuman Ring AIR charger for longer trips/ vacations. I also like the idea of hooking up to a power bank and chucking the ring (and charger) into the bag when I forget to charge it.

Designed a cover for the Ultrahuman Ring AIR charger to keep the ring. 

When charging on the desk, the cover can be flipped over and slipped onto the charger base.

If you want to charge your ring on the go, pop in the ring and hook it up to a power bank. The cover will prevent your ring from dislodging. A little peep hole on the cover let you know the charge status of the ring.

When not wearing the ring for prolong period, you can also chuck the ring onto the charging base with this cover so you don't misplace it.

Print Settings

• Nozzle: 0.4mm
• Layer Height: 0.2mm
• Walls: 3
• Infill density: 30%
• Brim/ Support: None

I used ABS+ for this print. Any material would work fine.