Tiger Hueforge

Project: Tiger.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 100x114.08mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA PolyLite Pro Black Transmission Distance: 0.3
PLA Sunlu Red Transmission Distance: 5.7
PLA Sunlu Orange Transmission Distance: 6.4
PLA PolyLite Pro Yellow Transmission Distance: 11
PLA Sunlu White Transmission Distance: 7.1
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #15 (1.28mm) swap to Orange
At layer #17 (1.44mm) swap to Yellow
At layer #23 (1.92mm) swap to White for the rest.
 

You can use similar colors, you don't need the exact filaments.