Huawei R48xx PSU Mount

Parts to mount a Huawei R48xx PSU and its connector to a plate. 

Fits at least Huawei R4830S1 and R4850G6 PSU and PHZ-F020304-BW001 connector (the one with the L/N/PE spade terminals).
The other common connector version (with L/N screw terminals and a separate PE on the mounting plate) fits as well, but the part has to either be modified to fit a ring terminal on the inside (see https://www.printables.com/make/2561916) or a brass screw must be used to connect the PE on the outside (the conductivity of steel (or even worse, stainless steel) isn't good enough).

Mounts to the plate with 4mm countersink screws, the connector is mounted to the part using M3 screws.

The PSU can slide in from the front and is held in place using the metal handle/clip on the front of the PSU.

OpenSCAD sources, connector specs, connector STL, etc. available on https://github.com/patagonaa/huawei-r48xx

An ESPHome component for CAN communication is also available on my GitHub: https://github.com/patagonaa/esphome-huawei-r4850