Drawer side panel
To prevent bowls and lids from falling sideways out of the drawer, I have designed these side panels.
4
14
0
99
updated
February 22, 2025
Description
PDFThe STL files each contain 4 parts to prevent the parts from detaching from the print bed due to the small contact area and the tall height.
Print instruction
- material: PETG or similar
- supports: no
- layer height: 0,3mm
- nozzle diameter: 0,4mm or 0,6mm
- brim: recommended
- enclosure: not required
Tags
Model origin
The author marked this model as their own original creation.
