Ecobee SmartSensor Print-in-Place Ceiling Mount

Swivels around base to alter angle +/- 5'.
5
30
0
483
updated January 16, 2022

Description

PDF

Printed on a MK3 w/ 0.2mm nozzle using Esun PLA+. 

Found I had to sometimes use a flat edge to dislodge the upper and lower parts to allow it to swivel freely, but this may be solved by reducing the nozzle temperature. 

Allowed me to ceiling mount my SmartSensor and can change the angle as needed (I do wish I designed it with a steeper angle) 

Base gets press fit (not it only goes in on one side. 

Thanks 

Tags



Model origin

The author hasn't provided the model origin yet.

License