Load Cell Pedal MOD PXN PDHM

This is a mod for use with PXN PDHM, with this mod you can have a load cell in your brake pedal.
It is totally plug and play, you don't need to change the original electronics.

It uses a inexpensive 50kg load cell a HX711 and a arduino micro.

I'm using it for at least 3 months so I feel that 3D printend pieces can handle the forces involved.

I bought a Yellow, 20x10x30mm spring on aliexpress and skate ruber dumpers, In the steps files there is a option to use these dumbers and other with out, I feel that these dumpers are not needed, but I cut one to use inside the spring, this make a big diferrence. So you have to insert some rubber inside a half or a third part of the spring.