Braava Jet m6 tank funnel

The funnel has an end to lock like the cap. Can be printed with 0.2mm layer height and PLA. The model is already in the correct orientation. Supports are needed only at the connecting piece. The slope for the funnel shouldn't need support. I found 0.2mm for the top contact distance of the support worked on my printer.

Updated model (V2): I added end stops on the connecting piece that way it stops turning just like the cap that comes with the mop. I did accidentally mirror it but it should still work fine with the only difference being that you need to turn the funnel in the opposite direction that the cap turns to lock.