Multiboard Milwaukee Drill & Impact Holders

Multiboard holders for Milwaukee M18 drills and impact drivers.

• Left or right facing (your choice).  
• HD or LD (Recommend HD for full size/bigger).

Print Settings:

tl;dr: 3/3/3 | 30% Gyroid | Auto Tree supports | Auto Brim

Layers: 3 Walls/3 top layers/3 bottom layers
Infil: 30% Gyroid 
Supports: Auto Tree
Brim: w/ 0.1mm gap

Multiboard Interface:

You will need these to attach to multiboard per drill/impact you are hanging up.  I.E. if you are hanging up 2 drills, multiply (x) by 2.

Per Holder:

(2) Heavy Weight-Bearing Hook Snap

https://than.gs/m/1130430

(2) Moderate Weight-Bearing Snap

https://than.gs/m/989145

(4) Small Thread - Multipoint

https://than.gs/m/1123334