Hueforge Luke Skywalker Star Wars

Hueforge of an advertising poster featuring Luke Skywalker for the release of Star Wars - The last jedi.
Cropped to 4/3 (200*150) to make it easier to find a frame
The photos shows the result in 200*150 and a nozzle of 0.4
You can change the X and Y dimensions but do not change the Z dimensions

HueForge is a software that enables users to create detailed multi-color 3D prints using a technique called filament painting, which does not require a multi-material 3D printer (but a MMU/AMS/CFS... makes printing easier)

You must define the printing parameters indicated in the description below and change the filament on the indicated layers.
If you don't know how ?
Without MMU/AMS/CFS…
https://help.prusa3d.com/article/insert-pause-or-custom-g-code-at-layer_120490

With MMU/AMS/CFS... :
https://help.prusa3d.com/article/colorprint-with-the-mmu_124861#examples

You can use filaments other than those indicated, but the result will differ.
Try to use filaments with a similar color and transmission distance.
To get an idea of the transmission distance of your filaments, you can find examples of tests here:
https://www.printables.com/search/models?q=hueforge+td

Hueforge description
 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
 The Model is 149.9x200mm in size
 You may print at higher layer heights below the Min Depth of 0.48mm
 The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used:
    PLA Black
    PLA AzureFilm Red pearl Transmission Distance: 3.6
    PLA BambuLab Basic Brown Transmission Distance: 2
    PLA BambuLab Matte Dark Brown Transmission Distance: 2
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Red pearl
    At layer #11 (0.96mm) swap to Brown
    At layer #14 (1.2mm) swap to Dark Brown
    At layer #15 (1.28mm) swap to Jade White for the rest.

Timelapse