Manley the St*nley Tumbler Clicker Fidget Keychain

Join my Patreon to get this and over 30 other models this month!!
patreon.com/Jambabydesigns

Meet Manley, a tribute to your favorite Stanley tumbler cup!! He comes with or without a sweet face, and has a companion Emotional Support Cup keychain!!

And if you join my Patreon, there are custom versions coming out as Patreon Exclusives (hint- rainbows and mushrooms!)

These fidgets make a satisfying click when fitted with a key switch, and look adorable on your keys, purse or backpack.

There is a single color STL model, and a multicolor 3MF file that has combined parts and separated parts in case you don't have an AMS. Each part is no more than 4 colors for easy printing with an AMS.

Most key switches fit nice and tight. If your key switch has an outline around the center cross and does not fit in the cap, the outline can be trimmed off for a good fit. I recommend Kailh box white 3-pin key switches available on Amazon and AliExpress. They are good quality and very clicky!!

3D printing settings

0.16 layer height
2 walls
arachne walls
detect thin walls ON
concentric top layers
top shell layers 4
8% gyroid infill
Supports needed on handle of cup- tree auto on buildplate
only one layer on top surfaces OFF*

*This is a setting under Quality on Bambu Studio. You should leave it permanently OFF (NOT APPLIED) in order to get better top surfaces on your prints.