8-13mm Hose Adapter
Connect your 8mm hose to your 13mm hose (both inner diameter).
15
69
0
224
updated
February 14, 2025
Description
PDFStory: I needed to connect the hose of my mini pump to a regular 13mm hose to be able to attach a Gardena quick connector. After the first version, I have added some chamfers so you can print without any support. If you have any trouble fitting the hose onto the adapter just dip the end of the hose into hot water for one or two minutes.
I have used PLA but you can also use PETG and ASA filaments:
PLA | |
| SUNLU PLA Plus | Amazon |
| Amazon Basics | Amazon |
| GEEETECH Filament PLA | Amazon |
| ELEGOO PLA+ | Amazon |
| eSUN PLA+ | Amazon |
| JAYO PLA+ | Amazon |
PETG | |
| eSUN PETG Filament | Amazon |
| OVERTURE PETG Filament | Amazon |
| ERYONE PETG Filament | Amazon |
| SUNLU PETG Filament | Amazon |
| Polymaker PolyLite PETG | Amazon |
| FormFutura - ReForm - rPET | Amazon |
| extrudr® XPETG | Amazon |
| TECBEARS PETG | Amazon |
| GIANTARM PETG | Amazon |
| Elegoo Rapid PETG | Amazon |
ASA | |
| extrudr® DuraPro ASA | Amazon |
| Polymaker PolyLite ASA | Amazon |
| AzureFilm 3D Black | Amazon |
| eSun ASA | Amazon |
Please note that the links are affiliate Amazon links. Feel free to click on them to support me. :) Apart from that, you can also support my work by buying me a coffee.
If you print one, please post a make! If you encounter any issues, post a comment. Thanks!
Tags
Model origin
The author marked this model as their own original creation.
