Clay Puck Making Kit for Shrinkage/Expansion Calculation (or anything else)

Slab & Cutter sets for repeatable Clay Puck Making. Created in view of Shrinkage/Expansion testing of Clay Bodies.

Modelled in 70mm, 85mm and 100mm sets. FYI, 70 is sufficient for normal testing.

Presses (with or without knobs) are totally optional. They are modelled to fit within the “Cookie Cutters” to prevent warping when removing the cutter from the slab. 

Normally .5in slab is created to be cut. Added roller pin guides for easy height gauge. Need to print two. 

If you do not have a caliper, I recommend this one by Jan Štech: https://www.printables.com/model/786337-caliper