PRUSA MINI+ & Enclosure allen key holder

Description

Tool holder for 6 allen keys supplied with PRUSA MINI+ & Enclosure bought in 2025.

Keys and their hole diameter:

1. 1.5 mm allen key - 1.8 mm hole
2. 2.0 mm allen key - 2.4 mm hole
3. 2.5 mm allen key - 2.9 mm hole
4. 2.5 mm allen key - 2.9 mm hole (3 & 4 keys are same [supplied with enclosure])
5. 3.0 mm round body with star key - 3.2 mm hole
6. 3.0 mm allen key - 3.5 mm hole

I don't like tools fall out their holes, so I was playing with different diameters. Have to take into acount seam inside holes, this is my best try. Hope you will find it good enough :)

My Printing Setup

• Layer Height: 0.10 mm
• First layer height: 0.20 mm
• Infill: 0%
• Supports: Not required
• Brim: width 4 mm & separation 1.5 mm
• Bottom solid layers: 5
• Ironing: Optional

Fits to keys supplied with PRUSA MINI+ & Enclosure bought in 2025.